Centurion Systems
Centurion D5 EVO
Centurion D5 EVO is a SonSec-supported legacy Centurion Systems sliding gate motor. SonSec still services, repairs and maintains existing D5 EVO installations where product condition, safety devices and parts availability make support practical.
Verified against existing SonSec Centurion Systems supported-legacy catalogue notes in this theme. No unverified technical specifications are published for this legacy model.
Overview
Centurion D5 EVO is a SonSec-supported legacy Centurion Systems sliding gate motor. SonSec still services, repairs and maintains existing D5 EVO installations where product condition, safety devices and parts availability make support practical.
Verified Compatibility
- Category
- Gate Automation
- Manufacturer
- Centurion Systems
- System Family
- Supported Legacy Products
- Product Type
- Sliding Gate Motor
- Connection / Bus Technology
- Centurion sliding gate motor service record; exact installed controller, receiver and accessory configuration must be confirmed on site.
SonSec Technician's Notes
Confirm the exact model, site limits and manufacturer installation instructions before quoting or commissioning.
SonSec Verdict
SonSec recommends checking the site mechanics, power, safety devices and access-control needs before specifying Centurion D5 EVO.
Ideal For
Existing D5 EVO installations that need service, repair, maintenance or fault finding.
Sites where SonSec can confirm mechanical condition, electronics condition, safety devices and parts availability before quoting work.
Customers deciding whether to repair a legacy Centurion sliding gate motor or replace it with a current supported model.
When Not to Choose
Do not specify D5 EVO as a new current-product installation.
Do not repair an unsafe gate, damaged rack, unstable power path or compromised safety-beam installation without correcting the underlying issue.
Things to Consider
Legacy support depends on parts availability, gate condition, safety condition and whether repair is safer and more economical than replacement.
Confirm remotes, receiver/controller access, batteries, rack and pinion, limit behaviour, safety beams, intercom or access-control triggers and site wiring before repair decisions.
Do not treat this legacy record as a current SMART or SMART+ product page.
Installation Notes
This page is for supported legacy service, repair and replacement planning rather than new-installation specification.
Replacement advice should consider current Centurion models only after site condition, gate load, accessory wiring and safety requirements are checked.
Maintenance Notes
Service checks may include batteries, power supply, controller or PC board condition, remote and receiver behaviour, rack and pinion alignment, limit setup, safety beams, intercom or access integration and mechanical gate condition.
Fault finding should separate electrical, controller, receiver, battery and mechanical gate problems before parts are replaced.
Service Life Expectations
SonSec can support legacy Centurion sliding gate motors where condition and parts availability make repair practical.
If repair is not practical or safe, SonSec can advise on motor replacement with a current supported Centurion path.
Key Features
Supported legacy product
Centurion D5 EVO is kept separate from current SMΔRT+ models and appears in the SonSec-supported legacy Centurion sliding gate motor set.
Still serviced by SonSec
SonSec can assess, service, repair and maintain existing D5 EVO installations where the site condition and parts path make support practical.
Fault-finding scope
Service intake can include power and battery checks, remotes, rack and pinion condition, limit setup, controller or PC board checks, safety beams and intercom or access-control integration.
Motor replacement advice
SonSec can advise whether repair, motor replacement or a current Centurion upgrade path is the better option after inspection.
Safety-device review
Safety beams, physical gate condition, wiring and access-control triggers should be checked before returning a legacy gate motor to service.
Verified model identity
Centurion D5 EVO is published as model D5 EVO from Centurion Systems in the Gate Automation catalogue.
Customer-facing product type
Centurion D5 EVO is classified as Sliding Gate Motor in Supported Legacy Products for routing, filters and related-product logic.
Connection and integration path
Centurion D5 EVO uses Centurion sliding gate motor service record; exact installed controller, receiver and accessory configuration must be confirmed on site..
Compatibility is explicit
Centurion D5 EVO compatibility is limited to the verified catalogue relationship for this model.
Source-backed content
Centurion D5 EVO content is tied to the local SonSec source registry and seeded catalogue record.
Specifications
| Specification | Value |
|---|---|
| Exact Model | D5 EVO |
| Manufacturer | Centurion Systems |
| Category | Gate Automation |
| Product Type | Supported legacy sliding gate motor |
| System or Product Family | Sliding Gate Motors |
| Published Status | Supported Legacy Product |
| Technical Specs | Not published on this SonSec page; confirm the exact installed variant and condition during service intake. |
| Connection or Bus Technology | Centurion sliding gate motor service record; exact installed controller, receiver and accessory configuration must be confirmed on site. |
| Canonical Route | https://sonsec.co.za/products/gate-automation/centurion-d5-evo/ |
Recommended Applications
Residential
Commercial
Supported Legacy
Compatible Accessories
- Existing remotes, receiver/controller paths, safety beams, batteries, rack and pinion hardware, and intercom or access-control triggers must be verified against the installed site.
Recommended Accessories
- Safety beams, healthy batteries, correctly aligned rack and pinion hardware, and verified access-control triggers where the existing installation supports them.
FAQs
Can SonSec install Centurion D5 EVO?
SonSec can assess the site and advise whether the product is suitable for the required security or automation task. Final recommendations depend on site conditions and product compatibility.
Can SonSec repair a system using Centurion D5 EVO?
SonSec can diagnose faults on supported systems and advise whether repair, replacement or maintenance is the correct next step.
Which accessories should be used with this product?
Accessory selection must be confirmed against the exact product model, manufacturer documentation and installed system design.
Is official documentation available?
Where an official public manufacturer document has been verified, it is listed on the standalone Product Manuals page.
What information should I provide when booking support?
Provide the product name, installed location, symptoms, photos where useful, recent power events and whether the issue affects access or site security.
Common Faults
Service & Maintenance
- Confirm the exact product model and installed accessories before service work.
- Check power, battery condition and wiring before replacing control equipment.
- Use official manufacturer documentation where a product-specific setting or procedure is required.
Warranty / Support Notes
- This SonSec page is for supported legacy service and repair assessment, not for presenting the model as a current new-installation product.
- Manufacturer warranty and support depend on Centurion terms, installation condition and product age.
Compare With
Compare with current Centurion model
Use the current Centurion product page when repair is not practical or a modern replacement is being considered.
Related Products
Image coming soon
SUPPORTED LEGACY PRODUCT
Centurion D10
Centurion D10 is a SonSec-supported legacy Centurion Systems sliding gate motor. SonSec still services, repairs and maintains existing D10 installations where product condition, safety devices and parts availability make support practical.
View Product
Image coming soon
SUPPORTED LEGACY PRODUCT
Centurion D10 Turbo
Centurion D10 Turbo is a SonSec-supported legacy Centurion Systems sliding gate motor. SonSec still services, repairs and maintains existing D10 Turbo installations where product condition, safety devices and parts availability make support practical.
View Product
Image coming soon
SUPPORTED LEGACY PRODUCT
Centurion A10
Centurion A10 is a SonSec-supported legacy Centurion Systems sliding gate motor. SonSec still services, repairs and maintains existing A10 installations where product condition, safety devices and parts availability make support practical.
View ProductProduct Support
Need help with Centurion D5 EVO?
Contact SonSec for verified Centurion product advice, installation, repair or maintenance.