Paradox
Paradox EVO192
Paradox EVO192: Digiplex EVO 192-zone control panel with eight onboard zones, zone doubling to 16 onboard zones where applicable, eight partitions, 999 users, built-in access-control support and expansion through the EVO bus architecture.
Verified against the official Paradox product page on 2026-07-31.
Overview
Paradox EVO192: Digiplex EVO 192-zone control panel with eight onboard zones, zone doubling to 16 onboard zones where applicable, eight partitions, 999 users, built-in access-control support and expansion through the EVO bus architecture.
Verified Compatibility
- Category
- Alarm Systems
- Manufacturer
- Paradox
- System Family
- Digiplex EVO Systems
- Product Type
- Panels and Consoles
- Connection / Bus Technology
- Digiplex EVO 4-wire bus control panel with wired zones, ATZ zone doubling and expansion-module support
- Compatible Families
- Digiplex EVO Systems
- Compatible Panels / Consoles / Hubs
- EVO192
- Required Receiver / Module
- RTX3 required for supported wireless remote/wireless-device paths; compatible bus/zone expansion modules required for expansion beyond onboard zones
- Incompatible or Restricted Families
- Paradox M System, Spectra SP and Magellan MG unless an official migration or module relationship is verified
- Compatible App
- Compatible remote-management application depends on installed communicator, firmware and current Paradox service path
- Restrictions / Migration Notes
- Do not confuse EVO192 192-zone capacity with the Paradox M25 / M25 LTE M System capacity., RTX3 receiving Magellan wireless transmitters is not proof that RTX3 is compatible with Magellan/MG control panels., Do not assign M System products to EVO192 unless official documentation verifies that exact model relationship.
SonSec Technician's Notes
Confirm the exact Paradox platform, wireless frequency, site ownership, installer access and official documentation before installation, service or repair.
SonSec Verdict
SonSec supports supply, installation, commissioning, service and maintenance for approved Paradox products. Repair and upgrade work remains subject to product condition, official support status, parts availability and commercial practicality.
Ideal For
Large residential, commercial and high-security sites needing many zones and partitions.
Existing Digiplex EVO installations where EVO192 panel service, expansion or replacement is technically appropriate.
Alarm and access-control sites where EVO bus modules and access-control integration are part of the design.
When Not to Choose
Do not use EVO192 as a substitute for M System product design unless an official migration path is verified.
Do not specify it for a small site when a simpler verified panel architecture is more appropriate.
Do not infer compatibility with every Paradox detector, keypad or communicator merely from shared Paradox branding.
Things to Consider
Do not confuse the EVO192 192-zone capacity with the Paradox M25 / M25 LTE M System record.
Wireless devices require a verified receiver/transceiver path such as RTX3; transmitter support is not Magellan/MG panel compatibility.
Confirm exact panel firmware, module firmware, communication module and installer access before quoting service or expansion.
Installation Notes
Commission panel zones, ATZ/zone-doubling, partitions, bus modules and access-control doors against the current EVO192 manual.
Check power supply loading, auxiliary output demand, bell output and communication-module requirements before adding modules.
Use only verified EVO-compatible bus devices and expansion modules.
Maintenance Notes
Record firmware version, module inventory, partition map, communication path and installer access before service work.
Test event reporting, communication modules, battery backup, siren/bell output and access-control functions during maintenance.
Review legacy communicator and app dependencies before recommending upgrades.
Service Life Expectations
Condition-led support
Replacement planning
Key Features
Expandable to 192 zones
The official Paradox Digiplex/EVO listing identifies EVO192 as a 192-zone control panel.
Eight onboard zones
Paradox lists eight onboard zones, or 16 with zone doubling where ATZ is applicable.
Eight partitions
The official feature table lists eight partitions.
999 user codes
The official table lists 999 user codes and 999 remote controls with RTX3.
Built-in access-control support
Paradox lists built-in access-control features for the EVO192 platform.
Communication-module support
The official page lists PCS Series, IP150 and VDMP3 support.
Verified model identity
Paradox EVO192 is published as model EVO192 from Paradox in the Alarm Systems catalogue.
Customer-facing product type
Paradox EVO192 is classified as Panels and Consoles in Digiplex EVO Systems for routing, filters and related-product logic.
Connection and integration path
Paradox EVO192 uses Digiplex EVO 4-wire bus control panel with wired zones, ATZ zone doubling and expansion-module support.
Compatibility is explicit
Paradox EVO192 compatibility is limited to EVO192; required module/accessory path: RTX3 required for supported wireless remote/wireless-device paths; compatible bus/zone expansion modules required for expansion beyond onboard zones.
Source-backed content
Paradox EVO192 content is tied to https://www.paradox.com/Products/CAT_DIGIPLEX/ControlPanels.asp?CATID=6&SUBCATID=42.
Specifications
| Specification | Value |
|---|---|
| Product Type | Digiplex EVO 192-zone control panel |
| Maximum Zones | 192 |
| Onboard Zones | 8 onboard zones; 16 with zone doubling / ATZ where applicable |
| Partitions | 8 |
| User Codes | 999 |
| PGM Capacity | 32 PGMs, 5 onboard |
| Expansion Modules | 254 |
| Event Buffer | 3584 events according to the current official Paradox Digiplex/EVO feature table |
| Remote Controls | 999 with RTX3 |
| Communication Options | PCS Series, IP150 and VDMP3 listed by Paradox; IP150+ support appears in Paradox legacy communicator compatibility material and must be confirmed by firmware/site condition |
| Programming / Upgrade | In-field firmware upgrade via 307USB, Babyware and WinLoad; compatible with NEware V4.0 or higher |
| Power Supply | 1.7A switching power supply |
| Certification Listing | EN 50131 grade 3 shown on the official product listing |
| Exact Model | EVO192 |
| Manufacturer | Paradox |
| Category | Alarm Systems |
| System or Product Family | Digiplex EVO Systems |
| Connection or Bus Technology | Digiplex EVO 4-wire bus control panel with wired zones, ATZ zone doubling and expansion-module support |
| Published Status | Verified Current Product |
| Canonical Route | https://sonsec.co.za/products/alarm-systems/paradox-evo192/ |
Recommended Applications
Residential
Commercial
Sectional Title
Compatible Accessories
- backup batteries where compatible
- keypads, detectors and expanders where supported
- sirens, panic buttons and communicators where applicable
Recommended Accessories
- backup batteries where compatible
- keypads, detectors and expanders where supported
- sirens, panic buttons and communicators where applicable
FAQs
Can SonSec install Paradox EVO192?
SonSec can assess the site and advise whether the product is suitable for the required security or automation task. Final recommendations depend on site conditions and product compatibility.
Can SonSec repair a system using Paradox EVO192?
SonSec can diagnose faults on supported systems and advise whether repair, replacement or maintenance is the correct next step.
Which accessories should be used with this product?
Accessory selection must be confirmed against the exact product model, manufacturer documentation and installed system design.
Is official documentation available?
Where an official public manufacturer document has been verified, it is listed on the standalone Product Manuals page.
What information should I provide when booking support?
Provide the product name, installed location, symptoms, photos where useful, recent power events and whether the issue affects access or site security.
Common Faults
Service & Maintenance
- Supply, install, commission, service and maintenance are approved for SonSec-supported Paradox products.
- Repair and upgrade work is assessed against system condition, official support status, parts availability and commercial practicality.
Warranty / Support Notes
- Warranty and support depend on correct installation, site condition, ownership permissions, installer access and manufacturer documentation.
Compare With
Paradox IP150
Legacy IP communicator that may be present on supported EVO installations.
Paradox IP150+
Ethernet communicator listed for EVO/SP/MG compatibility where panel and firmware support are verified.
Paradox DG85 Series
Wired detector record for verified bus or relay installations.
Related Products
SUPPORTED LEGACY PRODUCT
Paradox IP150
Legacy Paradox internet module for remote control, monitoring and IP reporting on supported EVO, Spectra SP and Magellan systems.
View Product
SUPPORTED LEGACY PRODUCT
Paradox IP150+
Paradox Ethernet internet module for supported EVO, Spectra SP and Magellan systems, including remote application and installer-software connectivity.
View Product
SUPPORTED LEGACY PRODUCT
Paradox DG85 Series
Legacy wired outdoor high-security digital motion detector module with bus or relay operation, rugged casing and selectable lens patterns.
View ProductProduct Support
Need help with Paradox EVO192?
Contact SonSec for Paradox alarm-system advice, installation, service or maintenance.