Centurion Systems
Centurion VANTAGE SMΔRT
Current Centurion VANTAGE SMΔRT linear swing-gate operator range with V300, V400 and V500 actuator-stroke variants.
Verified against official Centurion Systems product pages on 2026-08-01.
Overview
Current Centurion VANTAGE SMΔRT linear swing-gate operator range with V300, V400 and V500 actuator-stroke variants.
Verified Compatibility
- Category
- Gate Automation
- Manufacturer
- Centurion Systems
- System Family
- Centurion Swing Gate Motors
- Product Type
- Swing Gate Motors
- Connection / Bus Technology
- Linear swing-gate operator with V300, V400 and V500 variants
- Compatible Families
- Centurion Swing Gate Motors
- Restrictions / Migration Notes
- Confirm exact model, firmware, regional variant and site requirements before installation or migration.
SonSec Technician's Notes
Confirm the exact model, site limits and manufacturer installation instructions before quoting or commissioning.
SonSec Verdict
SonSec recommends checking the site mechanics, power, safety devices and access-control needs before specifying Centurion VANTAGE SMΔRT.
Ideal For
Swing gates where a low-profile linear operator suits the hinge and pillar geometry.
Domestic and commercial entrances requiring a current Centurion VANTAGE range.
Sites where safety beams, gate lock and configured I/O need to be planned together.
When Not to Choose
Unconfirmed compatibility
Unsafe installation conditions
Things to Consider
Confirm whether the SMΔRT+ version is more appropriate when always-on connected support is required.
Check leaf geometry and electric-lock requirements before installation.
Do not split V300, V400 and V500 into separate public pages unless Centurion publishes materially separate product records.
Installation Notes
Pre-installation assessment
System integration
Handover planning
Maintenance Notes
Periodic inspection
Fault history
Documentation
Service Life Expectations
Service life depends on correct installation, site load, duty cycle and preventative maintenance.
Key Features
Three VANTAGE variants
Centurion lists V300, V400 and V500 models with 300 mm, 400 mm and 500 mm strokes.
Rugged construction
The official page lists marine-grade aluminium housing, reinforced piston and aircraft-grade anodised tube.
Flexible onboard channels
The product page lists multiple onboard inputs and configurable low-current/high-current outputs.
Safety accessory path
Centurion lists Photon SMΔRT wireless safety-beam pairing as an installation option.
Gate-lock support note
The page references GLX900 electric gate lock reinforcement for swing-gate security.
Verified model identity
Centurion VANTAGE SMΔRT is published as model Centurion VANTAGE SMΔRT from Centurion Systems in the Gate Automation catalogue.
Customer-facing product type
Centurion VANTAGE SMΔRT is classified as Swing Gate Motors in Centurion Swing Gate Motors for routing, filters and related-product logic.
Connection and integration path
Centurion VANTAGE SMΔRT uses Linear swing-gate operator with V300, V400 and V500 variants.
Compatibility is explicit
Centurion VANTAGE SMΔRT compatibility is limited to the verified catalogue relationship for this model.
Source-backed content
Centurion VANTAGE SMΔRT content is tied to https://www.centsys.co.za/demo/img/prod/swings/vantage/CENTURION-VANTAGE-SM%CE%94RT-SWING-GATE-MOTOR.jpg.
Specifications
| Specification | Value |
|---|---|
| Product Type | Linear swing-gate operator range |
| Variants | V300, V400 and V500 actuator strokes |
| Applications | Domestic V300; commercial V400 and V500 according to Centurion page copy |
| Input Voltage | 90 V - 240 V AC +/- 10%, 50/60 Hz |
| Motor Voltage | 12 V DC |
| Push Force | 250 kgf max |
| Typical Opening Time | V400 short stroke 14.3 s; V500 long stroke 17.8 s |
| Daily Operations | 250 max |
| Receiver | Centurion code-hopping multichannel 433 MHz, 65 transmitter-button capacity |
| Exact Model | Centurion VANTAGE SMΔRT |
| Manufacturer | Centurion Systems |
| Category | Gate Automation |
| System or Product Family | Centurion Swing Gate Motors |
| Connection or Bus Technology | Linear swing-gate operator with V300, V400 and V500 variants |
| Published Status | Verified Current Product |
| Canonical Route | https://sonsec.co.za/products/gate-automation/centurion-vantage-smart/ |
Recommended Applications
Residential
Commercial
Compatible Accessories
- Centurion remotes, receivers, safety beams and approved access-control triggers where compatible.
Recommended Accessories
- Safety beams and correctly specified access-control triggers.
FAQs
Can SonSec install Centurion VANTAGE SMΔRT?
SonSec can assess the site and advise whether the product is suitable for the required security or automation task. Final recommendations depend on site conditions and product compatibility.
Can SonSec repair a system using Centurion VANTAGE SMΔRT?
SonSec can diagnose faults on supported systems and advise whether repair, replacement or maintenance is the correct next step.
Which accessories should be used with this product?
Accessory selection must be confirmed against the exact product model, manufacturer documentation and installed system design.
Is official documentation available?
Where an official public manufacturer document has been verified, it is listed on the standalone Product Manuals page.
What information should I provide when booking support?
Provide the product name, installed location, symptoms, photos where useful, recent power events and whether the issue affects access or site security.
Common Faults
Service & Maintenance
- Confirm the exact product model and installed accessories before service work.
- Check power, battery condition and wiring before replacing control equipment.
- Use official manufacturer documentation where a product-specific setting or procedure is required.
Warranty / Support Notes
- Warranty and support depend on correct installation, site condition, service records and current Centurion Systems terms.
Compare With
Compare with VANTAGE SMΔRT+
Use the plus range when SMΔRT+ connected support is part of the brief.
Compare with R6 Rotary Swing Gate Motor
Use R6 where the gate geometry calls for a rotary swing operator.
Related Products
Image coming soon
SUPPORTED LEGACY PRODUCT
Centurion D10
Centurion D10 is a SonSec-supported legacy Centurion Systems sliding gate motor. SonSec still services, repairs and maintains existing D10 installations where product condition, safety devices and parts availability make support practical.
View Product
Image coming soon
SUPPORTED LEGACY PRODUCT
Centurion D10 Turbo
Centurion D10 Turbo is a SonSec-supported legacy Centurion Systems sliding gate motor. SonSec still services, repairs and maintains existing D10 Turbo installations where product condition, safety devices and parts availability make support practical.
View Product
Image coming soon
SUPPORTED LEGACY PRODUCT
Centurion A10
Centurion A10 is a SonSec-supported legacy Centurion Systems sliding gate motor. SonSec still services, repairs and maintains existing A10 installations where product condition, safety devices and parts availability make support practical.
View ProductProduct Support
Need help with Centurion VANTAGE SMΔRT?
Contact SonSec for verified Centurion product advice, installation, repair or maintenance.